Acebeam Terminator M1 OD GREEN Limited Edition LED Cool White 6500K and Zoomable Flashlight -2300 Lumens w/ 1750 Yards Ultra Long Throw

Terminator M1 is Acebeam's first product that combines the latest LEP with LED technologies. Its LEP module produces a zoomable spotlight beam up to 1600 meters (1750 yards), with a distance of more than one mile! Easily switch between Spotlight or Floodlight with a shortcut key. Powered by a high capacity 5000mAh rechargeable USB-C 21700 Li-ion battery. The perfect replacement for the ultimate floodlight, spotlight, signal light or any light.

• Dual Light Source: 1x LEP + 3x LEDs (Cool White 6500K / Nichia 519A 5000K High CRI90 for options)
• Internal zoom design of LEP source, rotating the LEP head to adjust the focus without changing size.
• Beam Angle: 3~16°
• Max Output: 3500 lumens (LED);

                               700 lumens(LEP)

• Max Throw: LEP: 1600 meters(640,000cd);

                               LED: 231 meters(13,340cd)

• Impact Resistance: 1meter
• Waterproof: IP68, underwater 2 meters
• Battery: 1x ACEBEAM USB-C Rechargeable 21700 Li-ion Battery
• Power Switch: ON/OFF and output modes cycle
• Function Switch: LEP/LED switching
• Size:
• L:104mm/4.09''
• W: 35.2mm/1.39''
• H:63.4mm/2.5''
• Weight: 232.2g/8.2oz (Excluding Battery); 304.6g/10.7oz (Including Battery)
• Power Switch Operation
• ON: Click the Power Switch.
• OFF: Click the Power Switch when ON.
• Output Selection: When the LED light source option is ON, press and hold the Power Switch, and the LED light source will cycle from Low-Med1-Med2-High, release the Power Switch to select the output, and can be memorized next ON;
• Turbo: In the Unlocked state and under the LED light source option, double-click the Power Switch quickly to enter the Turbo output, and double-click again to switch between Turbo and memory output;
• Strobe: In the Unlocked state and under the LED light source option, quickly press the Power Switch three times to enter the Strobe output;
• Ultra-low: When the flashlight is OFF and under the LED light source option, press and hold the Power Switch to enter the Ultra-low output;
• Ultra-low, Strobe, and Turbo modes will be not memorized.

Lock/Unlock

• Lock: When the light is OFF, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and the flashlight will be Locked. At this time, any switch operation will be invalid.
• Unlock: When the light is Locked, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and then Unlock the light. If the current light source option is LED, the LED will be Ultra-low ON when unlocked, and if the current light source option is LEP, the light will be LEP ON when unlocked.

 
Function Switch Operation

• When the light is ON, click the Function Switch, the light output will switch between LEP light source or LED light source options.

 
LEP Zoom Operation

• When the LEP light source is ON, rotate the LEP head left or right, and the LEP beam angle will increase or decrease uniformly between 16° and 3°.